Plaster Primer

Plaster Primer (Solvent Based) 

Fired Earth Plaster Primer is a high quality, pigmented, alkali resistant primer and penetrating sealer for sound cement, cured gypsum plaster, concrete and brick substrates. It has been specially formulated with improved and enhanced benefits for maximum penetration and adhesion.


  • Lead free
  • Solvent based
  • Use on cured plaster, gypsym, rhinolite, fibre cement, ceiling board and brickwork
  • Alkali and water resistant
  • Excellent penetration and binding power
  • Excellent adhesion properties
  • Can be over-coated with wide range of water and solvent based top coats
  • Quick drying

New or previously painted masonry, plaster, gypsum, rhinolite, concrete, fibre cement brick surfaces after suitable preparation, where good substrate penetration and adhesion is required. Not suitable for green plaster or damp surfaces.

Approximately 7 to 8 m²/ litres per coat depending on the type of substrate and surface porosity. Spreading rate is based on the product being applied on to smooth substrate.

Surface or touch-dry: 30 minutes.
Recoating time: Minimum six (6) hours, no theoretical maximum limit, however seven (7) days is recommended.

Clean all tools (brushes, rollers and spray equipment) while wet with mineral turpentine immediately after use and while still wet.

Available in 5L & 20L